IR torch mounting?!
- Thread starter wjmansell
- Start date
-
- Tags
- ir torch night vision
BenBhoy
Well-Known Member
Do you mean the torch mount itself or a pic attachment to attach torch mount?
I've been very happy with my ludicrous lumens mount
NEW FULLY adjustable IR mount 25MM & 30MM lamp bodies. NEW FULLY adjustable IR mount 25MM & 30MM lamp bodies.
I've been very happy with my ludicrous lumens mount
NEW FULLY adjustable IR mount 25MM & 30MM lamp bodies. NEW FULLY adjustable IR mount 25MM & 30MM lamp bodies.
It is much the same with people selling high seats that only a (small person) can use the rail with out getting a bent neck.
There are decent mounts out there just you might not have found it yet!
I personally just go in the workshop and make it right as every stalker (must have a man cave and some tools)
These are the ones I use
Good mount, I previously used one with smaller thumb wheels but there was far too much movement in the unit even when the grub screws were nipped up to lock the position
I have the perfect, repeatable, rock solid, low profile setup. 34mm sphur mount and rail mounted at 45 degrees, 30mm bushings, 30mm qd warne ring with 25mm bushings for torch. Controls for torch in easy reach and quick to attach, remove. The bushings allow shims without risk to the scope or torch.
Attachments
Tony Morgan
Well-Known Member
Burris Signature Zee ring and offset mount from ANT Supplies. Solid and keeps torch out of the way. 
Flash G 74
Well-Known Member
Hello, The quick / cheap and easy way if using a I/ R torch on a Scope like Night Vision is buy a figure 8 clamp, This is all i use and have done for many years
BenBhoy
Well-Known Member
Not very adjustable/pointable though are they
tube mounted pic rail and an optilock ring with the spherical ball joint just slack enough to move and hold the position
Flash G 74
Well-Known Member
Hello, No but i only use my I/R torch clamped above my Photon or Red torch above my day scope
Yes but the rifle has a right weight bias
oh yes it does!!
What does that matter? @Tim.243Yes but the rifle has a right weight bias
Last edited:
wabbit warren
Well-Known Member
i use a cheap adjustable low mount from ebay its adjusts both windage and elevation
fixes onto the top of my scope via a picatinny rail
ive never had any problems with it. to be honest i prefer the IR on top of the scope not hanging off the side but thats only me
fixes onto the top of my scope via a picatinny rail
ive never had any problems with it. to be honest i prefer the IR on top of the scope not hanging off the side but thats only me
I like things to be balanced so mine is central and not bias to one side like anything in shooting balance is important also cheek weld, lop, cast, swing,
trigger control. you have gotten over the height problem of the LRF housing by having the IR to one side, mine is central so not bias L or R.
Do it how you want but you can't say it is not balanced as you have weight to one side which it is.
People have adjustable stocks, my .270 stock is packed out so the mount was cock on for the Z6
Balance isn’t a problem, its a small torch close to the COG, keeping it tight and rigid is better than being tall and floopy! Also, reflected energy from the torch bounces off the moderator to the side and not back into the scope or the shooters eyes. As you say, do it how you want. Just make sure you keep doing it.I like things to be balanced so mine is central and not bias to one side like anything in shooting balance is important also cheek weld, lop, cast, swing,
trigger control. you have gotten over the height problem of the LRF housing by having the IR to one side, mine is central so not bias L or R.
Do it how you want but you can't say it is not balanced as you have weight to one side which it is.
People have adjustable stocks, my .270 stock is packed out so the mount was cock on for the Z6
HIKMICRO IR TORCH ADJUSTABLE MOUNT BRACKET
lightweight and adjustable.
HikMicro IR Torch Adjustable Mount Bracket
HikMicro IR torch adjustable mount bracket clamp suitable to mount a torch directly to your Alpex model and provide a full range of adjustment to centralise.
www.blackwoodoutdoors.co.uk
That is fine, however small it is the weight is to one side which I said with out dressing it up it is bias. That is why people have used beam scales in reloading for donkeys years as when the weight is correct it sits in the middle.
Yours is like in the play ground with 2 of your
a little test of my "floppy" modified mount 3.5> 19.5 on top of the 4k
Used this for years with a lamp. Don’t see why it wouldn’t work with IR:
A63 - 25/30mm LED torch scope mount for TRIO-PRO and MG125 ranges
If you require this gun mount for a torch other than the products specified please contact us on 01730 264672 or via email - sales@clulite.co.uk.
clulite.co.uk
Similar threads
