A Long Time in the Making Knife Project

Stuart Mitchell

Well-Known Member
Over two years now, it still isn't fully there but it is bloody close.

The attached photos were numbers three, four and five of nine versions made to date over a period stretching back over that lengthy period, pandemic happenings didn't help the timespan at all, that all seemed to kick off just as this project did, also though there has been a tremendous amount of work behind the scenes, getting all into place, for if and for when, it all took a great deal of time to get right.

Two you see here get a Valkyrie Rifles Cerakote finish, I forget the funky names of the colours but the coatings of grey and black speak for themselves, the third a satin steel, trying to visualise a 'ceremonial' option, trial engraving on there too, that got scrapped.

Different grinds for perusal, serrates or not, tubes were used as fixings at this point, they were later scrapped in favour of screws.

You'll see the middle tube missing on the satin finished knife in the first photo but then added later, there was a plan for that middle orifice on the ceremonial knife, that was then brought to life on numbers six and seven though.

All the knives were hand-made at this point, fully, a lot of work and effort.


001.webp
 
This was a cool stage, 3D printed handle scales, they were never going to be used for the project, simply a means of testing files and fit etc.

One day they will be being used though for such jobs though, one day very soon I imagine, as soon as we can cost effectively print in a suitable material.


IMG_5694.webp



IMG_5696.webp
 
Everything fits, everything works, so the scales at this point moved on to CNC machining, three materials trialled, left to right in the photo of three, Micarta, G10 and Suretouch.

The handles fully strippable.


003.jpg



004.jpg
 
Always a fan of your work Stuart. I have a couple from you that see regular use.

Are these intended to be in SF100, or are you looking at something else?
 
As I said on facebook, I'm a real fan of the subtle hint towards the intended users.
Great product.
Cheers @Eddie P, much appreciated.
Wow!

Am I right in thinking these are intended to be fighting knives of some sort?
Do folk still fight with knives? Respectable folk that is :lol:
Probably a special commission from the Dorset Armed Response Unit. Otherwise known as the DRTCDU.

Far less paperwork involved than when slotting a munty with a 9mm.

K
Insightful as ever, thank you 👍
Always a fan of your work Stuart. I have a couple from you that see regular use.

Are these intended to be in SF100, or are you looking at something else?
Great question, thank you. All the ones you see are indeed SF100, purely because I have it and it has always been a WIP, I have no doubt that more will be in SF100 too but am also sure that I/we will be exploring other steel options too.
 
On the continent they often use similar knives for dispatching wounded deer and boar. I have shown the technique - knee on the neck to knock animal down and hold onto the ground, then boar dagger firmly into the chest just behind and below the shoulder blade. Animal dies very quickly. Pretty much same point of entry as a Hilar shot.

I was shown this by a lady dog handler. She must have been late 60’s early 70’s and only a little over 5ft. She breeds and trains Drahtaars (GWP) to a high level and usually has one if two with her. Dogs keep the animal at bay whilst hunter goes in with knife.
 
What would a non serrated version of this cost?
Short answer to that right now is I do not know; some will be for sale in the future the costings are still being complied though.

What I will say is though probably cheaper than you might think, handmade versions of these would easily start with a figure 5, those scales take a lot of time to make and shape, because of the involvement of the CNC I am fairly confident that 5 will become a 3.
 
Waves are part of the SBS insignia.
Cut away is to allow you to use the handle to smash a window.
Don’t know about the serration.
 
Back
Top