What size group at 25m with 10/22 ?

[dunnin21]

I’m using CCI and will be using a bench rest what size groups should I be getting with this

Thanks

 

[Stalker-of-the-deer]

What are you looking to use it for? A bit of plinking and rabbits or actual bench rest comps?

 

[Shooterman1]

Pretty much the same hole at 25 meters if you are shooting off some kind of rest

 

[Tarquin]

If its minimags be prepared to be underwhelmed. I use the SK semi auto in my 10/22 and can hold about 4 moa at 110yds.

 

[Stalker-of-the-deer]

Just seen your other post.

If it's for 25m bench rest your looking at a 6.5mm group of 10 rounds to stay competitive.

That's the size of the bull on a standard 10 target benchrest.

 

[Edinburgh Rifles]

Never seen a factory 10-22 shoot 6.5mm holes with anything at any range
there is a reason they look like trigger's broom when they perform well (new stock, new triggers, new hammer, new barrels, etc etc)

10-22 will never be as accurate as a bolt CZ or BRNO

 

[bowji john]

10 22 s are absolutely brilliant

They get more accurate as you gradually replace bits

Finally arriving at just about anything else other than a 10 - 22

They are what very large barn doors were originally built for

 

[Buchan]

My10/22 take-down gave a decent group at 25 with CCI segmented, which widened massively at 50. CCI minimag produced a decent group at 50

 

[pg339]

If you want to use a semi auto off a bench at 25mts try a CZ512. That will put the rounds in one hole without any aftermarket parts.

 

[Squirrelbasher]

If you want to use a semi auto off a bench at 25mts try a CZ512. That will put the rounds in one hole without any aftermarket parts.

Absolutely, my CZ511 will do the same.

 

[8x57]

What are you looking to use it for? A bit of plinking and rabbits or actual bench rest comps?

No one even tries to shoot bench rest competitions with a 10/22. It would be like entering a formula one race in a Lada Niva. However for gallery rifle comps the accuracy is quite acceptable when using good ammo. This is especially true if shooting at 50 metres or beyond.

 

[Bledd]

With a decent trigger, bull barrel and stiff-ish aftermarket stock, a 10/22 should manage 10 shots on a 5p piece, easy

 

[Cogswell & Harrison]

Another thumbs down from me regarding Mini-mags. SK Standard Plus gives me a 10mm ten shot ragged hole at 27 yards, walnut Sporter with a simple BX trigger upgrade.

 

[aris]

Ammunition makes a huge difference - not just in a 10/22, but any rifle. Try some match grade ammo - like Eley Match. If that makes no difference, then you can eliminate that variable - but in my experience, it makes a huge difference.

 

[B&W FOX]

10 22 s are absolutely brilliant

They get more accurate as you gradually replace bits

And a landrover gets more reliable, and I wouldn't buy one of those either

 

[welshwarrior]

10/22s are great sometimes you get one with factory bits left that shoot quite well other times you get them that shoot brilliantly but the only factory part is the serial number!

 

[simgre]

Never seen a factory 10-22 shoot 6.5mm holes with anything at any range
there is a reason they look like trigger's broom when they perform well (new stock, new triggers, new hammer, new barrels, etc etc)

10-22 will never be as accurate as a bolt CZ or BRNO

Experience has me disagree with you, given my rifle.

 

[simgre]

I’m using CCI and will be using a bench rest what size groups should I be getting with this

Thanks

Ammunition may by your limiting factor...

 

[Blackbeast?]

The 1022 with a 5 pound trigger pull, good luck with that one. I have one, has a barrel on and it might do a inch at 25 but guaranteed to put a flyer 2” off.

 

[Smellydog]

The 1022 with a 5 pound trigger pull, good luck with that one. I have one, has a barrel on and it might do a inch at 25 but guaranteed to put a flyer 2” off.

My last one was like that.