Scope mounts for Sauer 200 recommendation

Country Gent

Active Member
Evening chaps,

I am looking into changing the scope on a Sauer 200.
It currently has an older Swarovski scope which I wanted to swap for a new Vortex Viper.
Is there any plug and play solution to mounting the new scope or is it a custom job?
Could anyone recommend any mounts that would possibly fit this rifle with 30mm rings for the new scope?
Thanks!
 

Attachments

  • 0F28B6A2-1479-4F57-BD54-DF2DE9CD4680.webp
    0F28B6A2-1479-4F57-BD54-DF2DE9CD4680.webp
    74.4 KB · Views: 29
I can’t remember if the 200 uses the same bases as the 202, but if it does, Warne do bases and rings to fit. Pay close attention to the bases as the rear ones are thicker than the front.
 
I have a straight to receiver Leupold QR mount on mine. I think they had them at Uttings. Standby for the link…..
 
If the are the same basic action which it appears they are from a cursory google check. I would look for a picatinny rail, I have them on both my 202's makes fitting other scopes NV etc simple.
 
I would suggest the picatinny option, the best one I found was EAW. I think I may have some 202 bases (EAW) but not sure about 30mm rings. I will look later
 
As below, dovetail bases, roll off mounts and 30mm rings. The dovetail bases use quite short screws so I would suggest some epoxy or solder help
 

Attachments

  • IMG_8413.webp
    IMG_8413.webp
    228.7 KB · Views: 10
Thank you all! I think 200 and 202 might not be exactly the same as after some research sample bases would show up as 90/200 and 202 would be listed seperatley.
Koening thanks for suggesting Leupold QR seems like they have one for 200
 
Should
As below, dovetail bases, roll off mounts and 30mm rings. The dovetail bases use quite short screws so I would suggest some epoxy or solder help
From what I see 202 might not fit 200, but just in case let me know how much you were thinking for these?
 
Back
Top